How to Install Rammed Earth Wall Panels
How to Install Rammed Earth Wall Panels
1. Construction technology
The installation of rammed earth panels is very convenient. The best installation solution is straight nail and structural glue installation. The exterior wall of the building adopts the form of dry hanging, and the landscape wall adopts the form of dry hanging or pasting.
1): Adhesive form
Process: leveling the base layer → the bottom of the block board → applying glue on the reverse side of the rammed earth board, the structural glue (no nail glue) is 15cm away from the side of the rammed earth board, and embellished with a distance of 1015cm, then paste → detailed treatment → finish .
PS: The interior wall cannot use gypsum board as the base layer, because the surface of the gypsum board has a paper surface, which will make the paste not firm. During the construction process, please ensure that the base layer and glued surface of the rammed earth panel are free of dust.
2): Dry hanging form
①Ordinary dry hanging
Fix the 2cm*4cm keel on the indoor foundation wall, and the center distance of the wooden keel is 30cm. Lay the rammed ground plate horizontally and fasten it to the plate with more honeycomb holes.
②Strengthen dry hanging
On the outside of the ordinary installation wooden keel, install the wooden board, apply a layer of liquid glue on the surface of the wooden board, ram the wooden board horizontally, and fix it on the straight hole of the nail on the surface of the honeycomb wooden board.
2. Construction attention
1): Surface gap treatment
The cracks on the surface need to be repaired with soil (mud), the cracks need to be grouted with grout, and the soil curing agent yellow mud plastering mud is used to fill and repair the cracks.
2): expansion joints reserved on the board
Since the rammed earth panel has certain characteristics and elasticity of thermal expansion, cold shrinkage, wet expansion and dry shrinkage, in order to prevent subsequent deformation or edge collapse, a gap of 35mm should be left between two different rammed earth boards.
3. The scope of application of rammed earth board?
Indoor use
As a new type of decorative material, rammed earth board is widely used in interior walls, floors, ceilings, furniture, etc. The natural, simple visual texture effect blends perfectly with other interior materials, the unique texture of the rammed earth board is the texture used to enhance the space.
Rammed earth panels are derived from their original ecological materials, and the world is vigorously advocating the concept of environmental protection, which has also promoted the rebirth of rammed earth wall buildings to a certain extent. Environmental impact can be minimized by using low-cost environmentally friendly materials in engineering construction, which can be found everywhere.
Combination of Terrazzo and Glass Aggregate
The reason why terrazzo is bright as a mirror and crystal clear is mainly because terrazzo forms a glass film on the surface after mechanical processing, which not only has a mirror luster, but also can transparently show the inner structural level of the stone, that is, the pattern pattern that people observe, and the bright beauty is here.
Unique Design 800*800 Potato Powder Large Particle Terrazzo
Puzzle style reinvention, custom design is a bit miscellaneous; Both have chosen to firmly take the customized route, this is today's production line master said the most warm words; Okay, so let's continue with the size effect... !
How to Choose A Good Rammed Earth Board?
The rammed earth board is prefabricated in the factory, and it can be directly mounted on the site. Designers who like everything can be prefabricated should come over.
About New Eco-friendly Building Material Flexible Tile Stone
Flexible tile, also known as MCM tile, is a new type of environmentally friendly and recyclable building material, which is light and thin. Suitable for various architectural spaces